Hello, Welcome to Dasenic

STMicroelectronics H3LIS200DLTR Environmental and export classification status description

The H3LIS200DLTR is a low-power, ultra-low noise, three-axis accelerometer with a high resolution and integrated features. It is designed to detect acceleration along the X, Y, and Z axes. It supports various digital interfaces and is often used in applications where motion detection is important. Functions 1. Measurement of Static and Dynamic Acceleration: It can measure static acceleration (like gravity) and dynamic acceleration (e.g., motion, vibrations). 2. Selectable Measurement Ranges: The H3LIS200DLTR supports multiple full-scale ranges (e.g., ±2g, ±4g, ±8g) allowing flexibility based on application needs. 3. Digital Output: It provides a digital output via SPI or I2C interfaces, making it suitable for integration with microcontrollers. 4. Built-in Interrupts: The sensor can generate interrupts for various events, such as motion detection or orientation change. Applications 1. Consumer Electronics: Used in smartphones, tablets, and wearables for motion sensing and orientation detection. 2. Industrial Applications: Monitoring equipment vibrations or orientation in industrial settings. 3. Automotive: Implemented in vehicle dynamics systems for stability control or airbag deployment systems. 4. Robotics: Its capability of detecting motion can assist in navigation and stability control for robots. Alternative Parts 1. MPU-6050: A gyroscope and accelerometer combo that offers 6 degrees of freedom. 2. ADXL345: A low-power, 3-axis accelerometer with digital output and various built-in activity monitoring features. 3. LIS3DH: Another 3-axis accelerometer from STMicroelectronics but with a higher maximum data rate and features ideal for low-power applications. Embedded Modules - Development Boards: Various development boards integrate the H3LIS200DLTR to facilitate easier prototyping, such as Arduino-compatible boards or ST's own evaluation boards. - Sensor Fusion Modules: Some modules combine this accelerometer with gyroscopes and magnetometers for more advanced applications, such as inertial navigation. Related Q&A Q1: What is the maximum sample rate of the H3LIS200DLTR? A1: The H3LIS200DLTR can typically output data with a maximum sample rate of up to 1 kHz, depending on the selected settings. Q2: How do I connect the H3LIS200DLTR to a microcontroller? A2: You can connect the H3LIS200DLTR to a microcontroller via SPI or I2C. You will need to connect power supply pins, ground, and the respective data lines (SDA/SCL for I2C or MOSI/MISO/SCK/CS for SPI). Q3: What are the power consumption characteristics of the H3LIS200DLTR? A3: The H3LIS200DLTR is designed to be low-power, typically consuming around 10µA in power-down mode and up to 150µA in active mode, depending on settings. Q4: Can the H3LIS200DLTR be used for tilt detection? A4: Yes, it can be used for tilt detection by measuring the static acceleration due to gravity along its axes and calculating the tilt angle based on these measurements. Q5: What programming libraries are available for interfacing with the H3LIS200DLTR? A5: There are several libraries available for microcontroller platforms such as Arduino (e.g., Adafruit's or other community libraries) that provide functions for reading data from the sensor and configuring its settings.