LM358DR
LM358DR Introduction
LM358DR is a dual operational amplifier produced by Texas Instruments, which is widely used in analog signal processing applications. It belongs to the LM358 series and has a "DR" suffix, indicating that its package is SOIC-8 (Small Outline Integrated Circuit 8-pin package), which is suitable for surface mount technology (SMT). The LM358 series operational amplifiers have the characteristics of low power consumption and low cost, suitable for battery-powered devices and various general-purpose operational amplifier applications.
Main features of LM358DR:
Dual-channel operational amplifier:LM358 contains two independent high-gain operational amplifiers that can operate under single or dual power supply.
Low power consumption:The quiescent current of this chip is as low as 0.7 mA, so it is very suitable for battery-powered devices.
Wide power supply voltage range:Supports single power supply (3V to 32V) or dual power supply (±1.5V to ±16V), which can flexibly adapt to different power supply configurations.
High input impedance and low output impedance:The input impedance is high and the output impedance is low, which is suitable for processing high impedance signal sources.
Input voltage range:The input voltage can reach the negative end of the power supply (i.e. 0V), which is suitable for single power supply applications.
Output range:The output voltage range is close to the negative end of the power supply (ground), but cannot completely reach the positive power supply.
Operating temperature range:The typical industrial temperature range is -40°C to 85°C.
LM358DR typical applications:
Signal amplification: Suitable for various low-frequency signal amplification applications, such as sensor signal conditioning, audio amplification, etc.
Filter circuit: It can be used to build low-pass, band-pass, and high-pass filters.
Comparator: Although it is an operational amplifier, it can be used for simple voltage comparison tasks.
Integral and differential circuits: Used for analog calculations and signal processing.
Power management: Suitable for use as an error amplifier in a voltage regulation circuit.
LM358DR Parameters
LM358DR Similar Prodcuts Comparison
LM358DR vs LM358D vs LM358DRG4 vs LM258DRG4 Comparison
Parameter | LM358DR | LM358D | LM358DRG4 | LM258DRG4 |
---|---|---|---|---|
Image | ||||
Manufacturer | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
Package Type | SOIC-8 | DIP-8 | SOIC-8 | SOIC-8 |
Number of Amplifiers | 2 | 2 | 2 | 2 |
Package Options | SOIC-8, others | DIP-8, others | SOIC-8, others | SOIC-8, others |
Supply Voltage | 3V to 32V (single), ±1.5V to ±16V (dual) | 3V to 32V (single), ±1.5V to ±16V (dual) | 3V to 32V (single), ±1.5V to ±16V (dual) | 3V to 32V (single), ±1.5V to ±16V (dual) |
Output Voltage Swing | 0V to (Vcc - 2V) (at 5V) | 0V to (Vcc - 2V) (at 5V) | 0V to (Vcc - 2V) (at 5V) | 0V to (Vcc - 2V) (at 5V) |
Input Offset Voltage | 2mV (typical) | 2mV (typical) | 2mV (typical) | 3mV (typical) |
Input Bias Current | 100nA (typical) | 100nA (typical) | 100nA (typical) | 250nA (typical) |
Slew Rate | 0.3V/μs (typical) | 0.3V/μs (typical) | 0.3V/μs (typical) | 0.3V/μs (typical) |
Quiescent Current | 1.1mA (per amplifier, typical) | 1.1mA (per amplifier, typical) | 1.1mA (per amplifier, typical) | 1.1mA (per amplifier, typical) |
Power Consumption | Low Power | Low Power | Low Power | Low Power |
Lead-Free | Yes | Yes | Yes | Yes |
RoHS Compliant | Yes | Yes | Yes | Yes |
Typical Applications | Signal amplification, filters, audio systems | Signal amplification, filters, audio systems | Signal amplification, filters, audio systems | Signal amplification, filters, audio systems |
LM358DR and LM358DRG4 are ideal for modern, lead-free, environmentally-compliant designs. The LM358D offers the same functionality but is not lead-free, making it less suited for newer standards.
The LM258DRG4 is a similar part with slightly higher input offset voltage and input bias current, but it is also lead-free and RoHS compliant.
For surface-mount applications with compliance to modern environmental standards, the LM358DR, LM358DRG4, and LM258DRG4 are preferable. The LM358D is still suitable for older designs or through-hole applications but lacks the environmental compliance of the other variants.
LM358DR Pinout
LM358DR Pin Diagram
LM358DR Datasheet PDF and Reference Manual
Download datasheets and manufacturer documentation for LM358DR
FAQs for LM358DR
1. What is LM358DR?
A: LM358DR is a dual operational amplifier produced by Texas Instruments, packaged as SOIC-8. It has the characteristics of low power consumption and wide voltage range, suitable for a variety of analog signal processing applications, such as signal amplification, filtering and comparison.
2. What is the operating voltage range of LM358DR?
A: The operating voltage range supported by LM358DR is:
Single power supply: 3V to 32V
Dual power supply: ±1.5V to ±16V
This makes it suitable for a variety of power supply schemes, including low-voltage and high-voltage systems.
3. What is the quiescent current of LM358DR?
A: The quiescent current (typical value) of LM358DR is 0.7 mA, which is ideal for low-power designs, especially for battery-powered devices.
4. Can LM358DR work under single power supply?
A: Yes, the LM358DR is designed to work with a single power supply, and its input voltage can reach the negative end of the power supply (i.e. 0V), which makes it suitable for a variety of single-power applications, such as portable devices.
5. What is the gain-bandwidth product of the LM358DR?
A: The gain-bandwidth product of the LM358DR is 1 MHz, which is suitable for low-frequency signal processing and general amplification circuit applications.
6. What is the operating temperature range of the LM358DR?
A: The operating temperature range of the LM358DR is -40°C to 85°C, which is suitable for industrial and general consumer electronics.
7. What is the difference between the LM358DR and the LM358P?
A: The LM358DR and the LM358P are exactly the same in electrical performance and function. The main difference is the package form:
LM358DR: SOIC-8 (surface mount) package, suitable for automated production and patch processing.
LM358P: DIP-8 (dual in-line package), suitable for plug-in mounting and prototyping.
8. What is the input offset voltage of LM358DR?
A: The typical input offset voltage of LM358DR is 3 mV, which is acceptable for general applications. For applications that require higher accuracy, you may need to choose a model with lower offset voltage.
9. What applications is LM358DR suitable for?
A: LM358DR is suitable for a wide range of analog circuit applications, such as:
Low-frequency signal amplification (such as sensor signals)
Filter circuits (low-pass, band-pass, high-pass filters)
Voltage followers (buffers)
Current detection and current feedback circuits
Battery management and power supply circuits
10. Can LM358DR be used as a comparator?
A: Yes, although LM358DR is an operational amplifier, it can be used as a comparator in some occasions, especially in applications that do not require high accuracy and high-speed response. However, if more efficient comparator performance is required, it would be more appropriate to use a specially designed comparator IC.
11. What is the difference between LM358DR and LM358DR-JF?
A: LM358DR-JF usually has automotive-grade certification (such as AEC-Q100) and a wider operating temperature range (such as -40°C to 125°C), suitable for automotive and other high-reliability applications. LM358DR is a standard version suitable for general industrial and consumer applications.
12. What is the package form of LM358DR?
A: LM358DR adopts SOIC-8 package, which is a common surface mount package form, suitable for surface mount technology (SMT) in automated production.