Hello, Welcome to Dasenic

Texas Instruments TXB0104RGYR Environmental and export classification status description

of TXB0104RGYR The TXB0104 is a bidirectional voltage-level translator. It is designed to facilitate communication between devices that operate at different voltage levels, such as 3.3V and 5V systems. This device supports data transmission in both directions without the need for a direction control pin. It is particularly useful in scenarios where multiple logic levels are present. Functions - Bidirectional Level Shifting: The TXB0104 can shift signals between voltage levels on both the A and B sides, allowing for seamless communication. - High-Speed Operation: The device supports data rates up to 100 Mbps, making it suitable for high-speed applications. - Tolerance for Mixed Logic Levels: The TXB0104 allows for communication between devices operating at different voltage levels without significant signal distortion. - No Direction Control Required: It automatically detects the direction of signal flow, simplifying design requirements. - Low Propagation Delay: The device offers low propagation delays, ensuring timely data transfers. Applications - Interfacing between Microcontrollers and Sensors: Often used to connect microcontrollers operating at different voltage levels with sensors that may operate at a different level. - Communication between Different Logic Families: For example, connecting TTL and CMOS devices. - Level Shifting in I2C and SPI Applications: Used for I2C or SPI communication between devices with differing supply voltages. - Bidirectional Interfaces in Robotics: Enables communication between microcontrollers and various peripheral components in robotics. Alternative Parts 1. TXS0104: Similar to TXB0104 but with internal pull-up resistors, ideal for I2C applications. 2. TXB0304: A smaller version, useful for fewer channels. 3. LVC4245A: Another alternative for level translation between 2.5V and 5V. Embedded Modules The TXB0104 is commonly found in various embedded systems that require level shifting capabilities, such as: - Development boards (like Arduino with shields that may operate at different voltage levels). - Communication modules and interface boards. - Sensor interfacing and data acquisition systems. Related Q&A Q1: What is the typical use case for the TXB0104? A1: The TXB0104 is typically used in applications where communication is required between devices that operate at different voltage levels, such as a 3.3V microcontroller interfacing with a 5V sensor. Q2: How does the TXB0104 perform in high-speed applications? A2: The TXB0104 supports data rates up to 100 Mbps, making it suitable for high-speed communication protocols like SPI and I2C. Q3: Does the TXB0104 require any direction control signals? A3: No, the TXB0104 automatically detects and supports bidirectional communication without needing any direction control pin. Q4: What are the power supply requirements for using the TXB0104? A4: The TXB0104 has a supply voltage range typically from 1.2V to 5.5V, and the A and B sides can operate at different voltage levels within that range. Q5: What is a common alternative to the TXB0104 for specific applications? A5: For I2C applications, the TXS0104 is a common alternative, as it includes internal pull-up resistors, simplifying the design for such interfaces.