Texas Instruments SN74AUP1G74DCUR

The Texas Instruments SN74AUP1G74DCUR is a single D-type flip-flop with a buffered output. It operates using a single power supply voltage and is designed for low-power applications. The IC is housed in a small SOT-353 package, making it suitable for space-constrained designs. Functions: The SN74AUP1G74DCUR performs the following functions: 1. D-type flip-flop: It stores and transfers data on the rising edge of the clock input (CLK). 2. Buffered output: It provides an amplified version of the stored data at the D input. Applications: With its small form factor and low power consumption, the SN74AUP1G74DCUR can be utilized in various applications, including: 1. Portable devices: It can be used in battery-powered devices such as smartphones, wearables, and portable medical devices. 2. Low-power systems: It is suitable for applications that require low standby power consumption, such as IoT devices, sensors, and battery management circuits. 3. Communication devices: It can be used in wireless routers, modems, and network switches. Alternative Parts: If the SN74AUP1G74DCUR is not available or does not meet specific requirements, some alternative ICs that can be considered are: 1. SN74AUP1G74RSER: Similar to the SN74AUP1G74DCUR, but in a smaller DSBGA package. 2. SN74AUP1G74YZPR: A flip-flop with a different pin configuration, housed in a smaller DSBGA package. 3. SN74AUP1G79DCUR: Another single D-type flip-flop IC with a buffered output, housed in the same SOT-353 package. Embedded Modules: The SN74AUP1G74DCUR is a standalone integrated circuit and does not have any embedded modules. Here are three related Q&A: 1. Q: What is the maximum clock frequency supported by the SN74AUP1G74DCUR? A: The SN74AUP1G74DCUR can support clock frequencies up to 1.5 GHz. 2. Q: What is the typical power consumption of the SN74AUP1G74DCUR in standby mode? A: The SN74AUP1G74DCUR consumes approximately 5 μA of quiescent current in standby mode. 3. Q: Can the SN74AUP1G74DCUR operate with a supply voltage higher than 3.3V? A: No, the SN74AUP1G74DCUR is designed to operate with a single power supply voltage of 1.6V to 3.6V and should not be used with higher voltage levels. Please note that availability, specifications, and alternative parts may vary over time, so it's always recommended to refer to the official Texas Instruments documentation and contact their support for the most up-to-date and accurate information.