Micron Technology Inc. M25P16-VMN6P

Micron Technology Inc. M25P16-VMN6P Environmental and export classification status description

The Micron Technology M25P16-VMN6P is a serial NOR flash memory IC with a storage capacity of 16 megabits. It utilizes the Serial Peripheral Interface (SPI) for communication and operates at a voltage range of 2.7V to 3.6V. The IC comes in a small SOP-8 package. Functions: 1. Non-volatile Memory: The M25P16-VMN6P provides non-volatile memory storage, allowing data to be retained even when power is disconnected. 2. Sequential Access: It supports high-speed sequential access, allowing for easy read and write operations. 3. Addressable Storage: The IC is organized into sectors and blocks, making it possible to access specific memory locations for efficient data storage. Applications: 1. Consumer Electronics: The M25P16-VMN6P can be used in various consumer electronics devices such as smart TVs, digital cameras, set-top boxes, and gaming consoles for firmware storage and software updates. 2. Industrial and Automotive Systems: It is suitable for use in industrial control systems, automotive infotainment systems, and instrument clusters, where reliable and non-volatile storage is required. 3. Networking Devices: The IC can be utilized in routers, switches, and network equipment for firmware storage and configuration data. Alternative Parts: 1. W25Q16JVSNIG: This IC from Winbond is a similar serial NOR flash memory with the same storage capacity and SPI interface. 2. SST25VF016B-80-4I-QAF-T: Made by Microchip, this IC offers 16Mb of serial flash memory with SPI interface and operates at a voltage range of 2.7V to 3.6V. Embedded Modules: 1. Arduino SPI Flash Library: This library provides support for SPI flash memory chips, including the M25P16-VMN6P, on Arduino boards. 2. Raspberry Pi SPI Flash Programmer: A programming tool that enables reading and writing data to SPI flash memory chips, including the M25P16-VMN6P, using a Raspberry Pi. Here are three related Q&A: 1. Q: What is SPI flash memory? A: SPI flash memory is a type of non-volatile memory that uses the Serial Peripheral Interface for communication. It is commonly used in applications requiring small-sized, low-power, and fast read/write memory. 2. Q: Can the M25P16-VMN6P be operated at voltages lower than 2.7V? A: The M25P16-VMN6P operates within a voltage range of 2.7V to 3.6V. Operating at voltages below its specified range may result in unreliable or incorrect functioning. 3. Q: How can the M25P16-VMN6P be programmed or written to? A: The M25P16-VMN6P can be programmed by sending specific commands and data through the SPI interface. The data is written to specified memory addresses, allowing for sequential access and storage of information. Note: For specific technical queries about the M25P16-VMN6P, it is recommended to consult the datasheet or contact Micron Technology for accurate and up-to-date information.